← Back to Blog

Blower Door Testing Explained: What the Numbers Actually Mean

A blower door test is the single most useful diagnostic tool in building science. It measures how leaky a house is by pressurizing or depressurizing the building and measuring airflow. But understanding what the numbers mean — and what they don't — is where most contractors fall short.

How It Works

A calibrated fan mounts in an exterior door frame. It blows air out of the house (depressurization) or into the house (pressurization), creating a 50 Pascal pressure difference — roughly equivalent to a 20 mph wind hitting every surface simultaneously. The fan measures how much air it takes to maintain that pressure.

CFM50: The Raw Number

CFM50 is cubic feet per minute at 50 Pascals. A 2,000 sq ft house might test at 1,500 CFM50. By itself, this number doesn't tell you much. A bigger house will naturally have a higher number. You need to normalize it.

ACH50: Air Changes Per Hour

ACH50 converts CFM50 into air changes per hour based on house volume. Formula: ACH50 = (CFM50 × 60) / house volume in cubic feet. The 2018 IECC requires 3.0 ACH50 in climate zones 3-8 and 5.0 ACH50 in zones 1-2. Passive House targets 0.6 ACH50. Most existing homes test between 8-15 ACH50.

Build Your Own House? 42-page guide • 27 construction steps • 40+ years of field-tested knowledge
Get the Guide — $29

What's a Good Number?

New construction should hit code minimum at bare minimum. A well-built house by a contractor who understands air sealing typically lands between 1.5-2.5 ACH50. Below 1.0 ACH50, you need mechanical ventilation — an ERV or HRV — to maintain indoor air quality. Many energy programs target 2.0 ACH50.

Finding the Leaks

The real value of a blower door isn't the number — it's using it as a diagnostic tool. With the house depressurized, you can feel leaks with your hand, use a smoke pencil to visualize airflow, or use infrared thermography to see temperature differences caused by air leakage. Common culprits: rim joists, attic hatches, plumbing penetrations, electrical boxes, and recessed lights.

When to Test

Test twice during construction. First test at rough-in, after air sealing but before drywall. This is when you can still fix problems cheaply. Second test after completion for code compliance. If you only test once at the end and fail, fixing air leaks behind finished walls gets very expensive.

The Business Case

Blower door testing costs $300-500 for a third-party test. It proves your work quality to clients, catches problems before they become callbacks, and is increasingly required by code. If you're building tight houses, the blower door is your proof. If you're not testing, you're guessing.

Ready to Build Smarter?

Get the complete 42-page owner-builder guide — 27 construction steps from a builder with 40+ years experience and 1,000+ homes.

Get the Guide — $29
★★★★★
"I'm a retired teacher with zero construction background. Built a 1,800 sq ft house by myself using this guide and the consulting sessions."
— Patricia H., Asheville, NC

Free Building Tips — Straight to Your Inbox

Get practical construction advice from a builder with 40+ years and 1,000+ homes. No spam, ever.