Window shopping for new construction or replacement involves a blizzard of numbers: U-factor, SHGC, VT, air leakage, condensation resistance. Most contractors pick windows based on price and brand. Understanding the performance ratings helps you make better choices for each climate and orientation.
U-Factor: Heat Loss
U-factor measures how fast heat passes through the window assembly — lower is better. A single-pane window has a U-factor around 1.0. A good double-pane low-E window is 0.25-0.30. A triple-pane window can hit 0.15-0.20. Code requirements vary by climate zone — zone 5 requires U-0.30 or less. The U-factor includes the frame, not just the glass, so frame material matters.
SHGC: Solar Heat Gain
Solar Heat Gain Coefficient measures how much solar energy passes through the glass — lower means less solar heat enters. In hot climates, you want low SHGC (0.25 or less) to reduce cooling loads. In cold climates, higher SHGC on south-facing windows captures free solar heat in winter. This is where orientation-specific window selection pays off.
The Climate Zone Strategy
In cold climates (zones 5-8), prioritize low U-factor for heat retention. On south-facing windows, choose higher SHGC (0.35+) to gain passive solar heat. On north-facing windows, SHGC doesn't matter much — prioritize the lowest U-factor. In hot climates (zones 1-3), prioritize low SHGC on east and west windows where summer sun hits hardest.
VT: Visible Transmittance
VT measures how much visible light passes through — higher means brighter interiors. Low-E coatings that reduce SHGC also reduce VT. A window with 0.25 SHGC might have VT of only 0.35, making rooms feel dim. Look for windows with a high VT-to-SHGC ratio (called the Light-to-Solar Gain ratio, LSG). An LSG above 1.5 means good light without excess heat.
Frame Materials
Aluminum frames are strong but thermally conductive — terrible for cold climates unless they have a thermal break. Vinyl frames insulate well and are affordable but can warp in extreme heat. Fiberglass frames are the best performers — thermally stable, strong, and good insulators — but cost more. Wood frames look great inside but need exterior protection (often aluminum-clad or fiberglass-clad).
Installation Is Half the Performance
A high-performance window installed with gaps around the frame, no air sealing at the rough opening, and missing flashing performs no better than a cheap window. Proper installation includes shimming and leveling, continuous air sealing with foam or tape at the rough opening, and proper integration with the WRB and flashing system. Many window failures are installation failures.
The Cost-Performance Sweet Spot
Triple-pane windows cost 25-40% more than double-pane. In most climate zones, high-quality double-pane low-E windows hit the cost-performance sweet spot. Triple-pane makes economic sense in zones 6-8, in Passive House projects, or on north-facing elevations in cold climates. Everywhere else, spend the window upgrade budget on better air sealing and insulation instead.