Roof tear-offs are physically demanding and full of hidden challenges. Do it wrong and you're dealing with structural damage, poor deck prep, or incomplete removal. Here's the process that separates pros from amateurs.
Pre-Tear-Off Inspection
Before you touch the old roof, inspect the deck. Look for soft spots (water damage), rot, missing sheathing, or previous repairs. Take photos. Budget for a spongy deck—you'll likely find some.
Also check for asbestos in old roofing materials (pre-1980s). Some jurisdictions require testing or abatement. Add this to your estimate upfront.
Deck Prep
Pull all old roofing material, flashing, and fasteners. Inspect every square foot. Replace rotted, damaged, or missing deck. Missing nails and loose sheathing must be secured. A solid deck is the foundation of a good roof.
Safety First
Tear-off is dangerous work. Require fall protection (harnesses, guardrails). Protect landscaping and the house with tarps. Secure debris containers. Heavy debris falling from height kills.
Flashing Inspection
While the deck is exposed, inspect all flashing around chimneys, skylights, vents, and valleys. Old flashing often fails. Plan to replace it when you reroof.
The Tear-Off Process
Start at the ridge. Work downslope. Remove old roofing material in sections, pulling nails as you go.
Use a roofing shovel or fork. Efficient and safer than a hammer. Good tools make the work faster and easier.
Don't leave fasteners in the deck. Every nail, screw, and fastener must be removed. New fasteners will hit old ones and fail.
Check for double-layered roofing. Some houses have two layers of shingles. You might not see the second layer until you're partway through. Budget accordingly.
Deck Repair
Fix rotted or damaged sheathing. Replace missing sections. Secure loose boards. Sand down any high spots. Use 1/2" CDX plywood for replacements (structural grade).
Nailers at Penetrations
Ensure solid backing around skylights, vents, and chimneys. Add blocking if needed. Flashing anchors to solid wood, not void spaces.
Final Deck Check
Before new roofing goes down, do a final walkthrough. Every fastener gone? Deck smooth and solid? Flashing support ready? Once new roofing is on, you can't fix deck issues without tearing up the new roof.
Timeline and Crew
A standard residential tear-off takes 1-3 days depending on roof size and condition. A small crew (3-4 people) can tear off 30-50 squares per day. Budget accordingly.
Disposal
Old roofing material is heavy and bulky. Rent a dumpster (20-yard minimum for most residential jobs). Or haul to a recycling facility. Factor disposal into your bid.
Cost and Pricing
Tear-off typically runs $1.50-3.00 per square foot depending on roof complexity and deck condition. Unexpected deck damage will increase costs. Always build a contingency into estimates.
The Bottom Line
A good tear-off is the foundation of a good roof. Contractors who take time with this step build roofs that last. Shortcuts lead to callbacks and warranty issues.