Crawl spaces are one of the most problematic areas in residential construction. For decades, codes required venting them to the exterior. Building science has proven this wrong in most climates. Understanding why changes everything about how you handle crawl space moisture.
The Vented Crawl Space Problem
The theory behind vented crawl spaces was simple: let outside air flush moisture out. But physics doesn't cooperate. In summer, hot humid air enters the crawl space and hits the cooler surfaces (floor joists, subfloor, ductwork). The air cools below its dew point and moisture condenses on those surfaces. You're actually adding moisture, not removing it.
The Numbers Are Clear
On a 90°F day with 70% relative humidity, the dew point is about 79°F. The crawl space floor system might be 72°F because of air conditioning above. Every surface below 79°F collects condensation. Venting just keeps pumping more humid air in. Studies by Advanced Energy and others have shown that sealed crawl spaces consistently outperform vented ones for moisture control.
Sealed Crawl Space Design
A properly sealed crawl space includes: a heavy-duty ground vapor barrier (minimum 12-mil poly, preferably 20-mil) sealed at seams and edges, sealed foundation vents, insulation on crawl space walls (not the floor above), and conditioned air supply from the HVAC system or a dedicated dehumidifier. The crawl space becomes part of the conditioned envelope.
Ground Vapor Barrier Details
The vapor barrier is the most critical component. It must cover 100% of the ground surface, lap up the foundation walls at least 6 inches, be sealed at all seams with tape or mastic, and be sealed to piers and any penetrations. Use reinforced poly rated for crawl space use — not thin construction plastic that tears easily.
Wall Insulation Options
In a sealed crawl space, insulate the walls instead of the floor above. Rigid foam (XPS or polyiso) attached to the foundation walls is common. Closed-cell spray foam applied directly to the walls works well too. Extend insulation from the sill plate to the footing. Don't forget the rim joist — it's a major air leakage and thermal bridge point.
Humidity Management
Even sealed crawl spaces need humidity management. A small supply duct from the HVAC system (1% of floor area) or a standalone dehumidifier with a drain set to maintain 50-55% relative humidity works. Monitor humidity with a remote sensor — crawl space problems develop silently.
When Venting Still Makes Sense
In hot-dry climates (desert Southwest), vented crawl spaces can work because the outside air is already dry. In flood-prone areas, venting may be required by local code. And if the crawl space has active water intrusion that hasn't been fixed, sealing it traps the problem. Fix the water first, then seal.